+86-510-88156399
Shell-and-tube heat exchangers are key components in air compressor systems, serving as highly efficient heat transfer devices for cooling compressed air and recovering waste heat. These heat...
Shell and tube type heat exchangers are the most widely used indirect heat exchange devices in industrial applications. They separate two fluids through the tube bundle walls, achieving efficient...
A copper tube heat exchanger is an industrial device that uses copper tubes as the heat transfer element to achieve efficient heat exchange between two or more fluids. Its core principle is to...
High-efficiency Water Cooled Heat Exchanger is engineered to transfer heat from process fluids, oils, or gases into a cooling water circuit
The Nickel Brazed Plate Heat Exchanger (NPHE) utilizes 100% vacuum-brazed nickel filler with SUS316L corrugated plates.
The Copper Brazed Plate Heat Exchanger (BPHE) is a vacuum-brazed SUS316 corrugated plate unit designed for high-efficiency thermal transfer.
Finned tube heat exchangers are the type of heat exchangers in which fins are attached to the outer tube of the exchanger.
Hydraulic oil coolers are heat exchangers that are designed to remove excess heat from the hydraulic oil in a system.
A chemical tower is a vertical cylindrical pressure vessel used for mass transfer, heat transfer, and chemical reactions. It is a device used in the chemical industry for separating and purifying...
Silicon carbide (SiC) shell-and-tube heat exchangers are high-efficiency heat exchange devices made of pressureless sintered silicon carbide ceramic tubes, specifically designed for extreme...
Our liquid-gas tube bundle heat exchanger is a highly efficient heat exchange device designed for precise heat exchange between liquid-liquid, liquid-gas, and gas-gas media. This heat exchanger is...
Fixed Tube Sheet Heat Exchanges refers to a shell-and-tube heat exchanger in which the tube sheets at both ends of the tube bundle are fixedly connected to the shell by welding. After the tube...
Susan Stouffer
Richard Hebert
John Ingram
Juanita Foster
Michael Shannon
Beatrice Mitchell
Nickel-brazed Plate Heat Exchangers can use deionized water, high purity fluids, and corrosive fluids and operate at temperatures of up to 350°C (662°F) and pressures up to 16 bar (232...
Overview. High performance: Brazepak nickel brazed plate heat exchangers offer the highest level of thermal efficiency, durability, and corrosion resistance in a compact, low cost unit. The...
The brazed plate heat exchanger has a simple operating principle. Based on the plate and nozzle orientation, each fluid passes through alternative channels within the heat exchanger. An...
Description. Whenever the resistance of copper is not enough, nickel as brazing material is chosen. The units of the GNS-Series offer all the advantages of a brazed plate heat exchanger,...
This item: 10 Plate 5"x12" Nickel Nickel Brazed Plate Heat Exchanger [1" MPT] $319.77 SharkBite 23101CP100 Crimp Ring, 3/8-Inch, Pack of 100, 100 $23.82 5 PIECES XFITTING 1" PEX X 1"...
SEC Manufactures and Distributes (BPHE) Brazed Plate Heat Exchangers in Copper, Nickel, or Titanium braze. Brazed Plate heat exchangers available in Double Wall and Air Gap copper or...
Professional manufacturer of pressure vessels and heat exchangers, Wuxi LanXing Pressure Vessel Co., Ltd. is located in Wuxi city, eastern China.
Tel: +86-510-88156399
Mob1: +8615852701809
Mob2: +8615951506886
Mob3: +8615952470757
Email: Zyc@cn-lxjt.com
Add: No.19, Feng Er Road, Xinwu District, Wuxi City, Jiangsu Province, China
Copyright © Wuxi Lanxing Pressure Vessel Co., Ltd. All Rights Reserved.Privacy Policy
